combination Samsung Galaxy A6 (2018 a605f/n free download

     

Flashing a Samsung device with a combination file requires careful attention and knowledge of the process. Here’s a general guide on how to flash a Samsung A6 2018 (SM-A605) using a combination file to remove bypass Google account and repair software issues:

  1. Download Combination File:
    • Find and download the appropriate combination file for your Samsung A6 2018 (SM-A605). Ensure that you download from a reliable source.

Samsung Galaxy A6+ (2018) (SM-A605F / FN)

2. Samsung Galaxy A6+ (2018) (SM-A605G / GN)

Samsung Galaxy A6+ (2018) (SM-A6050)

  1. Prepare Your Device:
    • Charge your Samsung A6 2018 to ensure it has enough power throughout the flashing process.
    • Enable USB debugging and OEM unlocking in the developer options. To do this, go to Settings > About device, and tap on the Build number multiple times until you unlock Developer options. Then, enable USB debugging and OEM unlocking.
  2. Backup Your Data:
    • Before proceeding with flashing, it’s essential to back up your important data as the process may erase all data on your device.
  3. Boot Your Device into Download Mode:
    • Turn off your Samsung A6 2018.
    • Press and hold the Volume Down, Power, and Home buttons simultaneously until you see a warning screen.
    • Press the Volume Up button to enter Download Mode.
  4. Download Odin Tool:
    • Download and extract the Odin tool on your computer. Odin is a flashing tool used specifically for Samsung devices.
  5. Connect Your Device to Your Computer:
    • Connect your Samsung A6 2018 to your computer using a USB cable. Make sure Odin recognizes your device by displaying a message in the log box.
  6. Load the Combination File in Odin:
    • In Odin, click on the AP/PDA button and select the combination file you downloaded earlier.
  7. Start Flashing:
    • Once you’ve loaded the combination file, click the Start button in Odin to begin the flashing process.
    • Do not disconnect your device during the flashing process and wait for it to complete.
  8. Reboot Your Device:
    • Once the flashing process is complete, your device will automatically reboot.
  9. Perform Necessary Setup:
    • Follow the on-screen instructions to set up your device after rebooting.
  10. Verify the Results:
    • After setup, check if the Google account bypass has been successful and if the software issues have been resolved.
  11. Factory Reset (Optional):
    • If needed, you can perform a factory reset from the device settings to ensure a clean start.

Remember, flashing your device carries risks, and if done incorrectly, it can result in bricking your device. Ensure that you understand the process fully and proceed with caution.

 

Scroll to Top