Combination Samsung m305f Frp in drk Free


 install Combination firmware on your Samsung M305F for the purposes you’ve mentioned, such as removing FRP, repairing DRK, fixing hang-on-logo issues, bypassing Google account verification, and unlocking the device, follow these steps:


  1. Download Required Files:
  2. Backup Your Data:
    • It’s crucial to back up all important data on your device before proceeding with firmware installation, as it may lead to data loss.
  3. Charge Your Device:
    • Ensure your device has sufficient battery charge to avoid interruption during the flashing process.

Steps to Install Combination Firmware:

  1. Extract Files:
    • Extract the downloaded Combination firmware and Odin files to a convenient location on your computer.
  2. Install Samsung USB Drivers:
    • Before proceeding, install the Samsung USB drivers on your computer to ensure proper communication between your device and Odin.
  3. Boot Your Samsung Device into Download Mode:
    • Power off your Samsung M305F device.
    • Press and hold the Volume Down, Bixby, and Power buttons simultaneously.
    • When a warning screen appears, release all buttons, then press the Volume Up button to enter Download Mode.
  4. Launch Odin:
    • Run the Odin application on your computer by double-clicking the Odin executable file.
  5. Connect Your Device to the Computer:
    • Use a USB cable to connect your Samsung M305F device to the computer. Odin should recognize your device, indicated by an “Added” message and an ID:COM port turning blue.
  6. Load the Combination Firmware:
    • In Odin, click on the AP/PDA button (depending on the Odin version) and select the Combination firmware file (with the .tar extension) you extracted earlier.
  7. Configure Odin Settings:
    • Ensure that only the “Auto Reboot” and “F. Reset Time” options are checked in Odin. Leave all other settings as default.
  8. Start the Installation Process:
    • Once you have loaded the Combination firmware file and configured Odin settings, click the “Start” button to begin the flashing process.
  9. Wait for Completion:
    • The flashing process may take a few minutes. Do not interrupt the process or disconnect your device until Odin displays “Pass!” in a green box.
  10. Completion and Reboot:
    • Once the flashing process is complete, Odin will show “Pass!” indicating successful installation. Your device will automatically reboot.
  11. Follow On-Screen Instructions:
    • After rebooting, your Samsung M305F device will boot into the Combination firmware. Follow the on-screen instructions to complete the initial setup.

1. Samsung Galaxy M30 (SM-M305F)

2. Samsung Galaxy M30 (SM-M305M)


  • After booting into the Combination firmware, you can proceed with the specific tasks you mentioned, such as removing FRP, repairing DRK, fixing hang-on-logo issues, bypassing Google account verification, and unlocking the device.
  • Ensure that you download the correct Combination firmware file compatible with your Samsung M305F model to avoid compatibility issues.
  • The flashing process carries risks, and any mistakes can potentially brick your device. Therefore, proceed with caution and ensure you understand each step before proceeding.
Scroll to Top