Download Infinix Hot 12 Play X6816C Pattern and FRP File: Obtain the necessary tools including the Infinix Hot 12 Play X6816C SPD Auth Bypass Tool, SPD Flash Tool, and SPD Driver for successful unlocking of patterns and FRP (Factory Reset Protection)
To flash the Infinix Hot 12 Play X6816C using the ITEL Free Flash Tool, you typically follow a series of steps. Here’s a general guide:
- Download ITEL Free Flash Tool: Obtain the ITEL Free Flash Tool from a reliable source or the official website.
- Download frp file Infinix Hot 12 Play X6816C : Obtain the firmware for your Infinix Hot 12 Play X6816C. Ensure that the firmware you download is compatible with your device model.
- Install USB Drivers: Install the USB drivers for your Infinix Hot 12 Play X6816C on your computer. This is necessary to establish a connection between your device and the computer.
- Extract Flash Tool: Extract the downloaded ITEL Free Flash Tool file to a folder on your computer.
- Extract Firmware: Extract the downloaded firmware file to a separate folder on your computer.
- Launch Flash Tool: Open the ITEL Free Flash Tool folder and run the application to launch the tool.
- Load Firmware: In the Flash Tool interface, locate the option to load or select the firmware. Navigate to the folder where you extracted the firmware and select the appropriate file.
- Prepare Your Device: Power off your Infinix Hot 12 Play X6816C completely.
- Connect Your Device: Connect your Infinix Hot 12 Play X6816C to your computer using a USB cable while holding down the required buttons to enter into the bootloader or download mode.
- Begin Flashing: Once your device is connected, click on the “Start” or “Flash” button in the Flash Tool interface to start the flashing process.
- Flashing Process: The flashing process will begin, and you’ll see a progress bar in the Flash Tool indicating the progress. Do not disconnect your device during this process.
- Flash Complete: Once the flashing process is complete, you’ll see a success message in the Flash Tool interface.
- Disconnect and Reboot: You can now disconnect your Infinix Hot 12 Play X6816C from the computer. If your device doesn’t reboot automatically, you can manually reboot it.
Please note that the exact steps may vary slightly depending on the specific version of the ITEL Free Flash Tool and the firmware you are using. Make sure to follow the instructions provided with the tool and firmware carefully to avoid any issues during the flashing process. Additionally, ensure that you have backed up any important data on your device before flashing.
Password File :- softwarecrackguru